Key Considerations for Your Outdoor Drainage Project

Poor drainage design and surface grading can exacerbate surface runoff (an environmental hazard) and cause substantial damage to landscaped areas.

Moreover, poor drainage flow, resultant from substandard drainage design and placement, remains the chief cause of ponding, which can degrade impervious surfaces and cause serious structural damage to any property. Here are some of the key considerations for your outdoor drainage project to help architects, specifiers, builders and skilled DIY practitioners select and implement the best drainage solutions.

1. Drainage Layout & Availability

One of the chief considerations for outdoor drainage sites is their access to existing plumbing and drainage systems.

The advantage of new building sites is that most allow for drainage systems to be established in order to meet the ‘lay of the land’, ensuring maximised water flow and adherence to best practice water-sensitive design principles (WSUD). However, older properties may offer fewer possibilities for alteration, and may be better suited to more traditional drainage arrangements.

Building surfaces (such as earth, stone or concrete) will also impact one’s ability to move or increase the number of available drains.

2. Use of Outdoor Area

If your drainage area is heavily trafficked or used for vehicular access/parking, it is critical to ensure your drainage solution can bear the weight of these excessive loads.

Many drainage solutions offer superior load ratings to ensure they can withstand these load forces and avoid buckling even under constant load pressures.

3. Environmental Concerns

Australia’s unique environmental challenges will greatly impact on the type of drainage materials and grating required for your outdoor area.

Key external variables such as exposure to airborne salinity (i.e. proximity to seashore), tree debris (e.g. leaves and seeds), exposure to urban pollutants (e.g. PAHs and corrosive chemicals) and even weather (dry arid versus wet tropical) conditions will all have a significant impact on the type of drainage you require and the materials best suited to withstand these unique environmental conditions.

Boasting an unrivaled depth of experience with linear drainage solutions, Stormtech welcomes questions about product selection and compliance, and can advise prospective clients on the most suitable drainage product for your building project.

Our skilled specialists work closely with specifiers, architects and builders to offer tailored drainage solutions, including bespoke drawings and plans for customised drainage designs. We work proactively with plumbing advisory services to ensure drainage is not only fit for purpose, but meets stringent Building Code of Australia (BCA) compliance measures. 

 

  Whitepapers

Choose from our collection of White Papers produced for Stormtech products and services.

 

The Custom Drainage Revolution

In complex spaces, such as those with unique layouts, particular aesthetic requirements, or difficult environmental conditions, standard drainage solutions may not always be effective. This is where customised drainage solutions come into play, providing individualised solutions to challenging drainage problems that are beyond the scope of standard “off-the-shelf” products. The Custom Drainage Revolution: Meeting the Challenges of Modern Commercial Design and Construction examines how custom drainage systems can meet the challenges faced by today’s building projects. Custom-designed drainage solutions excel in complex spaces because they are made from the ground up to satisfy the unique requirements of a project, guaranteeing a drainage system that precisely satisfies the space's functional and aesthetic requirements. Stormtech™ offers a tailored site-specific service to suit the complex needs of large and intricate projects, including a free site measure and quote. Linear drainage systems can be customised to suit unique design challenges, including dimensions, load, capacity, slip resistance and grate colour finishes, to give specifiers, trades and end users complete confidence that the products they are using are fit-for-purpose, and built for the required application.


Waterproofing of domestic wet areas

Water seeping into adjacent building elements due to improper floor grading and inadequate waterproof membrane installation in key areas, such as around the floor waste, frequently results in building damage. To avoid these issues, architects, designers and specifiers need to have a thorough understanding of the changes to floor waste, floor grading and waterproofing requirements in the 2021 version of AS 3740 “Waterproofing of domestic wet areas” and the 2022 update of the National Construction Code. Understanding AS 3740:2021 “Waterproofing of domestic wet areas”: A Guide to Floor Waste and Fall Requirements examines how the recent updates to the relevant standards and regulations impact wet area design and construction. Two of the most frequently reported building issues are improper floor grading in wet areas and non-compliance with waterproofing regulations. The most basic objective of any construction project should be to keep our buildings and people safe and preventing loss of amenity. This is more easily achieved by first understanding and then exceeding the requirements for wet area waterproofing in terms of material, design, and installation. Stormtech’s 120SCS Shower Screen Support drain will help you meet and exceed the new requirements in the NCC 2020 and AS 3740:2021 while at the same time drastically simplifying bathroom design and installation. This innovative product, which includes a Shower Screen Support Channel for any Stormtech grating style, is a versatile linear drainage system that provides dual functions as a drain for both sides of the shower screen and a support for the shower screen itself.


Beyond The Building Code

Building codes play a significant role in determining a building's long-term quality, safety, and energy efficiency. In Australia, this is fulfilled by the National Construction Code (NCC), which specifies the minimum necessary requirements for safety, health, amenity, and sustainability in the design and construction of new buildings (and new building work in existing buildings). Design and construction choices affect operational performance and maintenance costs during the lifetime of the building. Building codes, such as the NCC, help designers and builders “get it right” from the start. Once installed, some building components may be replaceable or upgradeable, but some aspects of how the building performs are “baked” into the design. This is especially the case for plumbing and waterproofing. Due to various factors—from stronger fire safety regulations to higher expectations for liveability—building regulations have grown more onerous in recent years. This, along with increases in the cost of materials and labour, has seen the cost of construction rise to some of the highest levels we have ever seen. “Chasing the minimum” is the default stance many architects, designers, and builders take when faced with the need to increase margins and deliver projects on schedule. This practice involves constructing buildings to the bare minimum, following the regulatory requirements to the letter, and making no attempt to exceed the performance level or specification set by the standard—even if doing so would result in better building performance over the long run. Is this a mistake?


Tried and Tested: Exploring Issues with Building Product Certification

With the rising cost of construction and supply chain issues across the globe, all parties in the building and procurement process need to be on guard and informed of the risks of products that fail to meet performance claims or fall short of Australian standards. Understanding the regulatory pathways used to ensure product conformance is especially important given the expanding variety of new and innovative products that are being sold. Product certification is a tool that can be used to ensure a product is compliant and fit-for-purpose, but the landscape is more complex than it appears. Tried and Tested: Exploring Issues with Building Product Certification is a useful guide to building product certification schemes and how they can help you reduce risk. We explain what certification means in relation to building products and provide examples of certification schemes relevant to the Australian building sector, including WaterMark. We discuss some potential misuses of certification to help building and design professionals avoid the most common pitfalls. We also look at several effective ways to reduce the risks associated with incorrect product specification. All Stormtech drains are Watermark certified for use in Australia. Stormtech is also the only drainage manufacturer with GreenTag Level A Gold certification, which is the product rating certification approved by the Green Building Council of Australia. Stormtech works proactively with plumbing advisory services to ensure drainage remains fully compliant with NCC regulations and Australian standards and exceeds the minimums to ensure not only fit for purpose, but reliability and durability.


Livable Housing Provisions & Level Threshold Compliance

Drainage maintains a straightforward but crucial function: making sure water can be removed from the property effectively, safely, and efficiently. This is not only important in bathrooms to avoid pooling water and unsafe conditions, but also in the transition between indoor and outdoor spaces. An effective drainage system prevents water ingress by draining it away, all the while ensuring a level transition between the two spaces. The National Construction Code (NCC) 2022 edition has new provisions that will make new Australian homes more suitable for people with mobility issues. New livable housing design requirements are included in the updated Code, changing the way we design homes to make them easier to use and more adaptable to the changing needs of occupants. Based on the Livable Housing Design Guidelines (silver level), first published by Livable Housing Australia, these new requirements represent a significant improvement in the housing options available to older Australians and those with physical disabilities. In practice, this entails eliminating steps whenever possible, creating more room in the bathroom, enlarging doorways, and making provisions for future modifications like the installation of grab rails.


Going Local Amid the Global Supply Chain Crisis

When designing and manufacturing plumbing and drainage systems in Australia, one of the first decisions you have to make is whether to make the product locally or outsource it from overseas. While the industry assumption is that it is more cost effective to manufacture offshore, this is not necessarily the case given the current instability in global supply chains.


Safety Lessons - A Specifier's Guide to Creating Safe & Sustainable Educational Facilities

In this whitepaper, we provide a concise look at the design standards that apply to schools in Australia and examine the key considerations when specifying for these facilities, with a particular focus on child-specific safety risks and sustainability requirements. In doing so, we provide designers and specifiers with the essential knowledge they need to create safe and sustainable learning spaces that meet the needs of a wide variety of end users.


Considerations When Selecting a Sustainable Drainage Provider

Amidst the rapidly expanding local and global construction sectors, sustainability is a key concern. Architects and specifiers must navigate a tricky terrain of mandatory regulation and compliance hurdles, coupled with growing social pressure and, importantly, their own drive to make a positive impact on the world. With growing numbers of home buyers and renters concerned about the sustainability credentials of their dwellings and increasingly willing to pay more for sustainable residences, the writing is on the wall. Architects and specifiers continue to rise to the challenges of increasingly sustainable architecture and now lead the charge with ever-more innovative solutions. This whitepaper will provide a detailed overview of factors for consideration by architects and specifiers when choosing a renowned, industry-leading drainage supplier to deliver effective sustainable drainage solutions.


Aging In Place

New homes that are being built now by first or second time homeowners are likely to be the homes that they live in into old age. New builds need to prioritise safety, accessibility and comfort to meet the needs of occupants now and into the future. Among the key design priorities include, eliminating trip hazards, mobility considerations and facilitating daily living activities such as bathing, grooming and cooking. If such requirements are not considered early, the homeowner will face costly house modifications as they age.


Style and Function: Specifying linear drainage systems for the hospitality industry

Style and Function: Specifying linear drainage systems for the hospitality industry

For the past five years, the Australian hospitality industry enjoyed a sustained period of growth. Buoyed by high tourist numbers and plentiful investment, it moved from strength to strength - and naturally a strong foundation of hospitality-focused architectural projects accompanied the boom. However the global economic havoc caused by the COVID-19 pandemic has decimated the industry - both in real terms and in short-term growth potential. At the time of writing, in March 2020, businesses are closing, full rosters of employees being laid off and future investment in the sector has all but dried up as the world waits to see just how protracted the fallout will be.


Home   /   Information + Support   /   Key Considerations for Your Outdoor Drainage Project